Carbon steel is an alloy of iron and carbon, with small amounts of manganese and silicon. Its strength, weldability and low cost make it the most widely used material for piping systems in oil and gas, power generation, refineries, petrochemical plants, water supply and general engineering.
We stock and supply carbon steel pipes, tubes, flanges, fittings and fasteners, including low temperature grades, manufactured to ASTM and ASME standards.
| Standard | Specifications |
|---|---|
| ASTM | A106, A53, A333, A671, A672, A179, A192, A210, A105, A350, A234, A193, A194 |
| ASME | SA106, SA53, SA333, SA671, SA672, SA179, SA192, SA210, SA105, SA350, SA234, SA193, SA194 |
| Grade | C | Mn | Si | P | S |
|---|---|---|---|---|---|
| A106 Gr A | 0.25 max | 0.27 – 0.93 | 0.10 min | 0.035 max | 0.035 max |
| A106 Gr B | 0.30 max | 0.29 – 1.06 | 0.10 min | 0.035 max | 0.035 max |
| A106 Gr C | 0.35 max | 0.29 – 1.06 | 0.10 min | 0.035 max | 0.035 max |
| A333 Gr 6 | 0.30 max | 0.29 – 1.06 | 0.10 min | 0.025 max | 0.025 max |
| A105 | 0.35 max | 0.60 – 1.05 | 0.10 – 0.35 | 0.035 max | 0.040 max |
| A350 LF2 | 0.30 max | 0.60 – 1.35 | 0.15 – 0.30 | 0.035 max | 0.040 max |
| A234 WPB | 0.30 max | 0.29 – 1.06 | 0.10 min | 0.050 max | 0.058 max |
| Grade | Yield Strength N/mm² | Tensile Strength N/mm² | Elongation (%) |
|---|---|---|---|
| A106 Gr A | 205 min | 330 min | 35 min |
| A106 Gr B | 240 min | 415 min | 30 min |
| A106 Gr C | 275 min | 485 min | 30 min |
| A333 Gr 6 | 240 min | 415 min | 30 min |
| A105 | 250 min | 485 min | 22 min |
| A350 LF2 | 250 min | 485 – 655 | 22 min |
| A234 WPB | 240 min | 415 – 585 | 22 min |
Values are specified minimums and can vary with product form and wall thickness. A350 LF2 and A333 Gr 6 are supplied with impact testing for low temperature service.
| Property | Typical Value | Unit |
|---|---|---|
| Density | 7.85 | g/cm³ |
| Specific Heat | 0.49 | J/g °C |
| Thermal Expansion Coefficient (20-100°C) | 11.7 | µm/m °C |
| Thermal Conductivity (100°C) | 51.9 | W/m °C |
| Modulus of Elasticity | 200 | GPa |
| Melting Range | 1425 – 1540 | °C |
Typical values for carbon steel at room temperature unless stated.
All carbon steel products supplied with complete MTC (EN 10204 3.1 / 3.2) as standard.
TUV, BV, DNV, SGS, Lloyds inspection available on request.
A350 LF2 and A333 Gr 6 supplied with impact testing for low temperature service.
Cutting, beveling, threading and special packaging available on request.
All carbon steel products are supplied with complete material test certificates (MTC), and third-party inspection is available on request. For technical data sheets, stock lists or bulk enquiries, please contact our sales team.