Aluminium
Aluminium (symbol: Al, atomic number 13) is a silvery-white, lightweight and soft metal with
excellent corrosion resistance and thermal conductivity. It is the third most abundant
element in the Earth’s crust (after oxygen and silicon) and the most abundant metal, making
up about 8% of the crust by weight.
At Sridhar Steel and Engineering Co., we supply aluminium pipes, tubes, flanges, fittings
and fasteners in popular alloys such as 2024, 6061, 7075 and 5083, suitable for a wide range
of industrial applications.
Popular Alloys
2024, 6061, 7075, 5083
Key Advantage
Lightweight & Corrosion Resistant
Forms
Pipes, Tubes, Flanges, Fittings, Fasteners
Certification
MTC EN 10204 3.1
Key Properties of Aluminium
- Lightweight – Density is about one-third that of steel, ideal for
weight-sensitive applications in aerospace and automotive industries.
- Corrosion Resistance – Forms a thin protective oxide layer when exposed
to air, offering excellent resistance in marine and corrosive environments.
- Conductivity – Excellent conductor of heat and electricity; widely used
in electrical transmission lines, heat exchangers and electronic devices.
- Malleability & Ductility – Highly formable by rolling, extrusion
and forging into a variety of shapes and sizes.
- Reflectivity – High reflectivity for visible light and thermal
radiation; suitable for mirrors, solar panels and heat shielding.
- Recyclability – 100% recyclable without loss of quality; recycling
requires only a fraction of the energy needed for primary production.
Applications of Aluminium
- Transportation – Lightweight structural components in automotive,
aerospace and marine industries (body panels, chassis, wheels, aircraft fuselages).
- Packaging – Cans, foils and containers due to light weight, corrosion
resistance and ability to preserve freshness.
- Construction – Windows, doors, roofing, curtain walls and structural
components.
- Electrical Transmission – Conductors and power cables offering high
conductivity, low weight and cost-effectiveness.
- Consumer Goods – Cookware, utensils, furniture and sporting equipment.
- Industrial Applications – Heat exchangers, chemical processing
equipment, machinery components and storage tanks.
Popular Aluminium Alloys – Chemical Composition & Mechanical
Properties
| Alloy |
Chemical Composition (%) |
Mechanical Properties |
| 2024 |
Cu 3.8–4.9 Mn 0.3–0.9 Mg 1.2–1.8 Si 0.5 Zn 0.25 |
Tensile: 470 MPa Yield: 325 MPa Elongation: 20% Hardness (HB): 120
|
| 6061 |
Mg 0.8–1.2 Si 0.4–0.8 Fe 0.7 Cu 0.15–0.4 Zn 0.25 Ti 0.15 |
Tensile: 310 MPa Yield: 276 MPa Elongation: 12% Hardness (HB): 95
|
| 7075 |
Zn 5.1–6.1 Mg 2.1–2.9 Cu 1.2–2.0 Cr 0.18–0.28 Others 0.2 max
|
Tensile: 570 MPa Yield: 503 MPa Elongation: 11% Hardness (HB): 150
|
| 5083 |
Mg 4.0–4.9 Mn 0.40 Cr 0.05–0.25 Fe 0.4 Others 0.15 max |
Tensile: 330 MPa Yield: 240 MPa Elongation: 12% Hardness (HB): 75
|
Note: Tensile strength is the maximum tensile stress a material can withstand before
breaking. Yield strength is the stress at which plastic deformation begins. Elongation is
the percentage increase in length before fracture. Hardness (Brinell) measures resistance to
indentation.
Aluminium Products We Offer
-
Types:
Seamless & Welded Aluminium Pipes
-
Alloys:
Alloys 6061, 5083, 2024 & more
-
Advantage:
Lightweight with excellent corrosion
resistance
-
Applications:
Ideal for structural & fluid handling
applications
-
Types:
Seamless & Welded Aluminium Tubes
-
Formability:
Excellent formability for heat exchangers
-
Conductivity:
High thermal conductivity
-
Tempers:
Available in various tempers
-
Types:
Forged & Cast Aluminium Flanges
-
Styles:
Slip-on, Weld-neck, Blind & Threaded
-
Advantage:
Lightweight & corrosion resistant
-
Suitable For:
Marine & industrial systems
-
Types:
Buttweld, Socketweld & Threaded
Fittings
-
Components:
Elbows, Tees, Reducers, Caps, Couplings
-
Advantage:
High strength-to-weight ratio
-
Ideal For:
Lightweight piping systems
-
Range:
Bolts, Nuts, Washers & Screws
-
Styles:
Stud Bolts, Hex Head, Socket Head
-
Advantage:
Lightweight & corrosion resistant
-
Options:
Standard & custom designs available
Quality Testing & Value-Added Services
Material Test Certificate
All aluminium products supplied with complete MTC (EN 10204 3.1 / 3.2) as standard.
Third-Party Inspection
TUV, BV, DNV, SGS, Lloyds inspection available on request.
Dimensional & Visual
Full dimensional check and visual inspection against order requirements.
Custom Processing
Cutting, machining and special packaging available on request.
Industries & Applications Served
Aerospace
Automotive
Marine
Construction
Electrical Transmission
Industrial Equipment
Packaging
General Engineering
Need Custom Dimensions or Urgent Stock Dispatch?
All aluminium products are supplied with complete material test certificates (MTC).
Third-party inspection is available on request. For technical data sheets, stock
lists or bulk enquiries, please contact our sales team.
Get Instant Quote