Brass is a copper-zinc alloy known for its excellent formability, attractive appearance and good corrosion resistance. It is widely used across decorative, plumbing, electrical and industrial applications because of its combination of strength, workability and aesthetic appeal.
At Sridhar Steel and Engineering Co., we supply brass pipes, tubes, flanges, fittings and fasteners in popular grades including Red Brass, Yellow Brass, 330, 360 and 464, manufactured to meet industry requirements.
| Type | Key Characteristics |
|---|---|
| Red Brass | High copper content, excellent corrosion resistance, reddish appearance |
| Yellow Brass | Higher zinc content, bright golden colour, good formability |
| 330 Brass | Good strength and machinability, suitable for industrial components |
| 360 Brass | Free-cutting brass, excellent machinability, widely used for precision parts |
| 464 Brass | Naval brass, high corrosion resistance in marine environments |
Compared to bronze, brass is more malleable, making it ideal for applications that require a high level of formability. It also has a relatively lower melting point (approximately 900°C). Other notable properties include:
| Property | Typical Value |
|---|---|
| Chemical Symbol / Composition | Primarily Cu + Zn (typically 60–80% Cu, 20–40% Zn). Small additions of Pb, Al or Sn for specific properties |
| Density | 8.4 – 8.7 g/cm³ |
| Melting Point | 900°C – 940°C (1652°F – 1724°F) |
| Young’s Modulus | 90 – 110 GPa |
| Shear Modulus | 33 – 40 GPa |
| Bulk Modulus | 100 – 140 GPa |
| Poisson’s Ratio | 0.33 – 0.36 |
| Tensile Strength | 290 – 620 MPa |
| Yield Strength | 150 – 450 MPa |
| Elongation at Break | 10 – 40% |
| Hardness (Brinell) | 65 – 230 HB |
| Electrical Conductivity | 23 – 45 MS/m (depending on alloy and condition) |
| Thermal Conductivity | 100 – 130 W/(m·K) |
Note: Properties vary significantly with exact composition and temper. Different brass alloys are engineered for specific strength, corrosion resistance, machinability or appearance requirements.
Brass is valued for its attractive appearance, corrosion resistance, malleability and ease of machining. Common applications include:
All brass products supplied with complete MTC (EN 10204 3.1 / 3.2) as standard.
TUV, BV, DNV, SGS, Lloyds inspection available on request.
Full dimensional check and visual inspection against order requirements.
Cutting, machining and special packaging available on request.
All brass products are supplied with complete material test certificates (MTC). Third-party inspection is available on request. For technical data sheets, stock lists or bulk enquiries, please contact our sales team.